Equipment and Hardware Wholesalers
£1,908.99 £1,599.99
Stel Iron Mig 221 P
Design and light weight make the Iron – MIG 221 ideal MiG portable work “on site “or in any workshop thanks to LCD technology, it provides fast selection of the material thickness to be welded. The machine provides the capability to weld in Manual, Synergic, Pulsed & Double Pulsed mode enabling a large selection of material to be welded including: Mild Steel, Stainless, Aluminium & Mig Brazing.
LCD screen: A large LCD screen provides the operator with clear and easy information
All parameters are displayed on the LCD screen to guide the operator through set-up and welding.
The 221P IronMig comes complete with a PARKER MB25, 3 metre Torch & 3 metre Earth return Lead & clamp; 1 feed Roll 0.8 – 1.0mm, for Mild Steel Mig Wires. A two year manufacturers (machine) warranty completes this package.
A Optional Premium Aluminium Torch & Feed Roll package is available for the 221P IronMig, making it an extremely useful piece of equipment. Please contact us for more detail & the support you will be given purchasing this machine from us!
Main voltage: 230/240V
Phase: 1
Frequency: 50/60Hz
Current Range: 30-200A
Wire Feed Rollers: 2
Welding Current 35% (40°C): 200A
Welding Current 60% (40°C): 130A
Welding Current 100% (40°C): 110A
Earth Cable: 16mm²
Degree of Protection: IP 23
Insulation Class: H
Cooing: Air
Work Temperature: 40°C
Length/Width/Height (mm): 480x250x370
Weight: 17,0Kg
| Weight | 19.5 kg |
|---|
Change polarity: By mounting the 0,9mm flux core wire NO – GAS and changing the polarity inside the machine you can weld without the use of gas, thus avoiding having to carry bottles, (it’s like an endless electrode )
Multispot: The function Multispot is a welding method which combines a pulse for a time, possible to adjust both welding and pause time.
Spool 5KG and 15KG: Portability thanks to the lightness and the practical design make the Iron – MIG the smallest Mig with 15kg spool.
Trigger Job: A selection of three programs can be called directly by pressing the trigger Torch.
Fly-Back: Advance dynamic electronic system of auxiliary input voltage (not traditional transformer) masters total control from all input power source voltages automatically.
Tig Lift: Using a Tig Torch with gas valve, the IRON-MIG can perform excellent DC TIG welding with lift arc ignition.
Auto Compensation: Automatically compensates for any variation in welding conditions caused either by irregularities of the workpiece or the movements of the operator’s hand. Ideal for deep angles.
Vertical Down: Vertical down welding of thin sheet metal with separation up to 5 mm between the edges.
Start Control: The approach speed of the wire to the piece and welding dynamics are synergic and provide limit spatters at the start with every material.
Thin Material: It provides a soft and controlled short arc even at lower parameters with a few spatters, good wetting, heating and deformation reduced with thin materials.
Brazing: In the IRON- MIG is also stored synergic programs for the brazing CuSi3% that make the Welder indicated for welding galvanized sheet metal and high-strength steels.
Aluminium: The excellent welding characteristics in pulsed provides outstanding performance on stainless steel and aluminium thanks to transfer control of the drop and the lower heat input
(OPTIONAL SPOOL GUN KIT)
